Post by vaporl on Jul 9, 2018 3:28:23 GMT
Aleader Bhive 100W BF Kit, Vandy Vape Simple EX Squonk Kit,Pico Squeeze 2 Squonk Kit
Aleader Bhive 100W BF Kit
Aleader Bhive Squonk BF 100W Starter Kit is optimized for builders looking for a portable squonk system, integrating a 100W maximum chipset powered by a single 18650 battery to pair with the squonk-ready BF Bhive RDA. The body is constructed from a sturdy resin and zinc alloy combination, featuring a resinous panel that is great at dispelling heat. The Bhive Squonk 100W Kit is great for filling on the go as it comes with a squonker pin and 7mL squonk bottle that can be used as a reservoir for extra eJuice. The Bhive Squonk 100W Starter Kit comes with the Aleader Bhive 24mm RDA, featuring a spacious build deck, bottom-fed squonk gold-plated 510 connection, and a simple but effective airflow system. The build deck plays host to two posts with two terminals each - top secured via Allen screws. The coil leads are fastened into them and hang above the airflow outlet which draws airflow from the side airslots measuring in at 9mm by 3mm which produce massive clouds and intense flavor. The 510 connection is squonk ready and gold-plated to ensure the best conductivity.
Feature:
Mod:
Wattage range: 1~100W;
Powered by 1 x 18650 battery (NOT INCLUDED);
Resin and zinc alloy construction;
7ml silicone bottle;
Mode: Power / Temp / Bypass;
Input voltage: 3.2~4.3V;
Temperature range: 93~315C / 200~600F;
Coil support (TC): Ni / Ti / SS;
0.91inch OLED display;
USB charging support;
RDA:
Diameter: 24mm;
Resin and stainless steel construction;
Dual post build deck;
Quad terminals;
6mm depth juice well;
Gold plated contact pin;
Comes with bottom feeder pin (pre-installed)
Click to see more detail about Aleader Bhive 100W BF Kit
Vandy Vape Simple EX Squonk Kit
Vandy Vape have release this tiny squonking device which is a rebuildable device intended for use with nicotine salts. The RDA has an adjustable bottom airflow which gives you the options of a 2.5mm - 0.6mm airflow option depending on your preference. It is easy to build on and comes equipped with a leak proof 510 connector! The mod encases a 4ml squonking bottle which is easily detachable from the main body of the device.
Specification:
Mod:
Rebuildable Nic salt device;
Small size as a pod system kit;
4ml juice capacity;
Working voltage: 3.2~4.2V;
Working current: <=6.5A;
Output voltage: 3.3~4.5V;
Coil resistance range: 0.8~3.0ohm;
Output mode: voltage mode;
Standby current: <=20uA;
Charging current: 800mA (battery 850mAh);
Material: PC, ABS, Nylon;
Tank:
6 adjustable bottom airflow:
0.6mm for 50~60mg Nic salt (3.3V);
0.8mm for 40~50mg Nic salt (3.3V);
1.0mm for 30~40mg Nic salt (3.6V);
1.5mm for 20~30mg Nic salt (3.9V);
2.0mm for 10~20mg Nic salt (4.2V);
2.5mm for restricted lung hit (4.5V);
Easy-to-build single coil build deck;
Leak-proof 510 connector
Click to order Vandy Vape Simple EX Squonk Kit
Eleaf Pico Squeeze 2 Squonk Kit
Here comes the iStick Pico Squeeze 2 Squonk Kit. It is a new version of Pico Squeeze, which is compact in size with an ergonomic design. Powered by single 21700 or a 18650 battery with an adaptor, the Pico Squeeze 2 TC Box MOD is capable of firing up to the max output of 100W. It also has a large e-juice silicon squonk bottle. Together with the 0.49inch colorful OLED screen and the bottom ventilation holes, you can enjoy a really amazing vaping experience from Pico Squeeze 2.
And the Coral 2 RDA is a single coil RDA with 24mm diameter, featuring a large build deck and the unique crooked posts which will bring you more convenience and pleasure for coil installation. Together with the detachable construction, it will be easy for cleaning and maintenance. Nice choice for DIY fans. Just take the iStick Pico Squeeze 2 home! This pack also includes an Avatar AVB 21700 4000mAh Li-ion Battery.
Specifications
Coil resistance - 0.2ohm
Output wattage - 1-100W
Output modes - Wattage / Bypass / Temp (Ni, Ti, SS) / TCR (M1, M2, M3)
Resistance range - 0.1-3.0ohm (wattage mode) / 0.05-1.5ohm (TC/TCR mode)
Temperature range - 200-600°F/ 100-315°C
Dimensions - 96.7mm x 55.8mm x 27.2mm
Battery - 1 x 21700 4000mAh (supplied) / 18650
Buy Eleaf Pico Squeeze 2 Squonk Kit Now!
Aleader Bhive 100W BF Kit
Aleader Bhive Squonk BF 100W Starter Kit is optimized for builders looking for a portable squonk system, integrating a 100W maximum chipset powered by a single 18650 battery to pair with the squonk-ready BF Bhive RDA. The body is constructed from a sturdy resin and zinc alloy combination, featuring a resinous panel that is great at dispelling heat. The Bhive Squonk 100W Kit is great for filling on the go as it comes with a squonker pin and 7mL squonk bottle that can be used as a reservoir for extra eJuice. The Bhive Squonk 100W Starter Kit comes with the Aleader Bhive 24mm RDA, featuring a spacious build deck, bottom-fed squonk gold-plated 510 connection, and a simple but effective airflow system. The build deck plays host to two posts with two terminals each - top secured via Allen screws. The coil leads are fastened into them and hang above the airflow outlet which draws airflow from the side airslots measuring in at 9mm by 3mm which produce massive clouds and intense flavor. The 510 connection is squonk ready and gold-plated to ensure the best conductivity.
Feature:
Mod:
Wattage range: 1~100W;
Powered by 1 x 18650 battery (NOT INCLUDED);
Resin and zinc alloy construction;
7ml silicone bottle;
Mode: Power / Temp / Bypass;
Input voltage: 3.2~4.3V;
Temperature range: 93~315C / 200~600F;
Coil support (TC): Ni / Ti / SS;
0.91inch OLED display;
USB charging support;
RDA:
Diameter: 24mm;
Resin and stainless steel construction;
Dual post build deck;
Quad terminals;
6mm depth juice well;
Gold plated contact pin;
Comes with bottom feeder pin (pre-installed)
Click to see more detail about Aleader Bhive 100W BF Kit
Vandy Vape Simple EX Squonk Kit
Vandy Vape have release this tiny squonking device which is a rebuildable device intended for use with nicotine salts. The RDA has an adjustable bottom airflow which gives you the options of a 2.5mm - 0.6mm airflow option depending on your preference. It is easy to build on and comes equipped with a leak proof 510 connector! The mod encases a 4ml squonking bottle which is easily detachable from the main body of the device.
Specification:
Mod:
Rebuildable Nic salt device;
Small size as a pod system kit;
4ml juice capacity;
Working voltage: 3.2~4.2V;
Working current: <=6.5A;
Output voltage: 3.3~4.5V;
Coil resistance range: 0.8~3.0ohm;
Output mode: voltage mode;
Standby current: <=20uA;
Charging current: 800mA (battery 850mAh);
Material: PC, ABS, Nylon;
Tank:
6 adjustable bottom airflow:
0.6mm for 50~60mg Nic salt (3.3V);
0.8mm for 40~50mg Nic salt (3.3V);
1.0mm for 30~40mg Nic salt (3.6V);
1.5mm for 20~30mg Nic salt (3.9V);
2.0mm for 10~20mg Nic salt (4.2V);
2.5mm for restricted lung hit (4.5V);
Easy-to-build single coil build deck;
Leak-proof 510 connector
Click to order Vandy Vape Simple EX Squonk Kit
Eleaf Pico Squeeze 2 Squonk Kit
Here comes the iStick Pico Squeeze 2 Squonk Kit. It is a new version of Pico Squeeze, which is compact in size with an ergonomic design. Powered by single 21700 or a 18650 battery with an adaptor, the Pico Squeeze 2 TC Box MOD is capable of firing up to the max output of 100W. It also has a large e-juice silicon squonk bottle. Together with the 0.49inch colorful OLED screen and the bottom ventilation holes, you can enjoy a really amazing vaping experience from Pico Squeeze 2.
And the Coral 2 RDA is a single coil RDA with 24mm diameter, featuring a large build deck and the unique crooked posts which will bring you more convenience and pleasure for coil installation. Together with the detachable construction, it will be easy for cleaning and maintenance. Nice choice for DIY fans. Just take the iStick Pico Squeeze 2 home! This pack also includes an Avatar AVB 21700 4000mAh Li-ion Battery.
Specifications
Coil resistance - 0.2ohm
Output wattage - 1-100W
Output modes - Wattage / Bypass / Temp (Ni, Ti, SS) / TCR (M1, M2, M3)
Resistance range - 0.1-3.0ohm (wattage mode) / 0.05-1.5ohm (TC/TCR mode)
Temperature range - 200-600°F/ 100-315°C
Dimensions - 96.7mm x 55.8mm x 27.2mm
Battery - 1 x 21700 4000mAh (supplied) / 18650
Buy Eleaf Pico Squeeze 2 Squonk Kit Now!
